[Fot] trt 3/4 head gasket

[Catpusher at aol.com]

Alas, many of us have tried this with negative results in distances  
measured in feet, not races.
Much has been posted about head gaskets; I never had to "O" ring a good  
steel gasket, and I always used GM gasket sealing compound # 1050026
 
TR Regards, 
 Hardy
 
 
From:  KENMUN at aol.com
To: fot at autox.team.net
Subject: [Fot] trt 3/4 head  gasket
Message-ID: <11209.5b862d85.3dcff460 at aol.com>
Content-Type:  text/plain; charset="us-ascii"

anyone having success with the stock  composite head gasket on a milled  
head. my head has been milled  .150" and the intake valve pockets are gone. 
 i'm 
not having much  luck with the steel gasket.
thanks, ken m. tr 3 vintage  racer.