[Fot] Christian Marx "MAD MARX" VITON CRANK SEAL AN UPDATE all available again and more

[Jim Gray]

I can't remember the last time the cost of anything went down.
Thanks Chris & Joe, the seals work great.
jim g

-----Original Message-----
From: fot-bounces at autox.team.net [mailto:fot-bounces at autox.team.net] On
Behalf Of Joe Alexander
Sent: Monday, November 26, 2012 5:57 PM
To: fot at autox.team.net
Subject: [Fot] Christian Marx "MAD MARX" VITON CRANK SEAL AN UPDATE all
available again and more

 FOT:

Good news......Christian shipped more seals to the U.S.

More good news.....changing suppliers and increasing volume reduced the cost
of replacement seals.

Further good news.....Christian is now producing the scroll housings from
new
billet material.

So now there is a choice of remanufactured scrolls and brand new scrolls.

Centering tools have been produced here in the U.S. and are available.

So, if you need this kit or individual parts, they are all available.

Remember, this is the 'belt and suspenders' kit, with the superior VITON
seal
and does not require the grinding of the crank.


Thanks to Christian for his thoughtful engineering and diligence in bringing
this kit to TR3 and TR4 drivers.


Joe Alexander
A. R. E.
645 1st Street
Jesup, Iowa 50648
319.464.4711  (cell)
n197tr4 at cs.com
_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe:
http://autox.team.net/mailman/options/fot/toodamnfunky@comcast.net