[Fot] TR4 Valve spring - pressure, assembled height, suppliers

[Joe Alexander]

TeriAnn is right.

It might be in one of Kas' books, I think.  TeriAnn's comprehensive website on
heads is back up, according to TeriAnn.  Another great resource that we have
on the FOT LIST, regardless of competition status.

There is a suggestion that this area can flutter and perhaps can disturb the
gasket seal.

The fix is something like drilling and tapping this area and running a screw
down to a solid point in the water passage.....then milling flush.

The FOT list is very much alive and well. The Mitty provided some stimulus,
methinks.





Joe Alexander
A. R. E.
645 1st Street
Jesup, Iowa 50648
319.464.4711  (cell)
n197tr4 at cs.com





-----Original Message-----
From: TeriAnn J. Wakeman <tjwakeman at gmail.com>
To: fot <fot at autox.team.net>
Sent: Sat, May 12, 2012 10:37 am
Subject: Re: [Fot] TR4 Valve spring - pressure, assembled height, suppliers


On 5/11/12 7:53 PM, Tony Drews wrote:
> Richard, the crack between #2 and #3 cylinders between the water holes
> is no big deal, don't worry about it.
>
Shouldn't you at least peg the crack?

Teriann
_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: http://autox.team.net/mailman/options/fot/n197tr4@cs.com