[Fot] Quarter Master clutches (spitfire)

[Rocky Entriken]

After I chewed up a flywheel/clutch, my engine builder hung a Quartermaster 
on my car. We did have some difficulties getting it to work right at first, 
eventually traced not to the Quartermaster setup but to the throwout 
arm/bearing in my bellhousing. Once we finally got that chased down, the QM 
has worked fine.

But it is a bit of an on/off switch, to the point I find it difficult to 
drive the car on the trailer. So now we usually push it on, which with at 
least two pushing ain't so hard.

--Rocky Entriken
  #4 Spitfire (HP race, GP solo)

----- Original Message ----- 
From: "Brad Kahler" <bkahler1 at gmail.com>
To: "Friends of Triumph" <fot at autox.team.net>
Sent: Thursday, May 03, 2012 6:20 AM
Subject: [Fot] Quarter Master clutches (spitfire)


> Amici,
>
> Are any of you Spitfire drivers using Quarter Master clutches on your race
> cars?  If so what can you tell me about them?  Anything special that would
> be nice to know before buying?
>
> We're thinking about switching to a Quarter Master flywheel and it is set
> up for their clutches only.
>
> Thanks,
>
> Brad
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: http://autox.team.net/mailman/options/fot/rocky@spitfire4.com