[Fot] Headers

[gasket.works at gte.net]

I purchased the individual Stahl pre-bent tubes, made my own flange and built my own header.  4 into one.  Then used burns stainless collector (non-stainless).  Fun to do if you can weld. 
Sent via BlackBerry from T-Mobile

-----Original Message-----
From: George Harmuth <harmug at us.ibm.com>
Sender: fot-bounces at autox.team.net
Date: Thu, 03 May 2012 12:42:45 
To: <fot at autox.team.net>
Subject: [Fot] Headers

I was looking at the various Spit engines in the paddock but I forgot to
ask what kind of headers people were using. My car came with a set of Tri-Y
and I replaced them with a new set two years ago. My understanding is these
style help with low to mid range power. After getting passed, at a very
good clip, on the RA straights last weekend, I'm looking at ways to get
more power and still have the car SCCA H-Prod legal. Headers / exhaust
system are one of the few areas where Prep level 2 engines are given free
range.

I'm thinking about a 4->1 style, like a Stahl, which I heard is better for
top end. Any input is appreciated.

thanks
mike

G. Michael Harmuth
_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: http://autox.team.net/mailman/options/fot/gasket.works@gte.net