[Fot] Cracked Head, can it be repaired?

[Joe Alexander]

 There is a place in Nevada, Iowa that specializes in that kind of repair.

Certainly it would be worth having them do the fix.

I'll start googling their contact info.



Joe Alexander
A. R. E.
645 1st Street
Jesup, Iowa 50648
319.464.4711  (cell)
n197tr4 at cs.com





-----Original Message-----
From: Tony Drews <tony at tonydrews.com>
To: fot <fot at autox.team.net>
Sent: Sat, Mar 31, 2012 5:35 pm
Subject: [Fot] Cracked Head, can it be repaired?


I found the source of my "head gasket" leaks - a cracked head.  It's
cracked around the inner circumference of where it meets the liner in
#4 cylinder.

Picture is here:
http://www.tonydrews.com/Test%20Pics/2012_0331Head_Crack0007.JPG

Is this something that can be fixed, or should I start brushing up on
my head porting techniques and build another head?

Thanks, Tony Drews
Hoping to make the Mitty still...
_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: http://autox.team.net/mailman/options/fot/n197tr4@cs.com