[Fot] Best Stromberg Carbs

[Joe Alexander]

 i think most folks know that SU needles can be used in Stromberg carbs with
the use of shim stock.

thought i would mention it, anyway.

it provides a lot of choices



Joe Alexander
A. R. E.
645 1st Street
Jesup, Iowa 50648
319.464.4711  (cell)
n197tr4 at cs.com





-----Original Message-----
From: Robert M. Lang <lang at isis.mit.edu>
To: gregmogdoc <gregmogdoc at surfnetusa.com>
Cc: fot <fot at autox.team.net>
Sent: Wed, Mar 28, 2012 6:58 am
Subject: Re: [Fot] Best Stromberg Carbs


Hi,

Speaking of which - what needles are folks using in their TR6's with
Strombergs? I installed alternate needles a while back, and never wrote
down what they are. I'm pretty sure they're B1AR's from a Jag, but I
cannot confirm that (yet).

In any case, these needles seem to be a tad rich and I need to confirm
that with a couple of chassis dyno runs.

In the meantime, I'd appreciate any feedback on the matter.

The following is an interesting article on replacing the fixed needles on
the early c cylinder federal spec. carbs (TR250 and early TR6):

http://www.buckeyetriumphs.org/technical/Carbs/AdjNeedle/AdjNeedle.htm

regards,
rml
---------------------------------------------------------------------------
Bob Lang              Triumph TR6!!            |  This space for rent
Former NER Solo Chair                          |
Voice:617-253-7438                             |  Cell: 339-927-4489
---------------------------------------------------------------------------
_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: http://autox.team.net/mailman/options/fot/n197tr4@cs.com