[Fot] TR6 distributor question

[Chuck Arnold and/or Kathleen Kelley]

I use the Pertronix distributor with the flamethower II unit in the race
car.  Works great.  Word of cuation, you can use a low impedance
flamethower coil with the II, but be careful you will burn up the coils not
made for it -- ask me how I $$$ know.

On Tue, Jun 12, 2012 at 4:09 PM, sherry robyn <sherryjimmy6116 at att.net>wrote:

> In a TR6, I have a somewhat hotter cam (done by the PO so I don't know any
> particulars), triple 40 DCOE Webers, a Crane ignition system, and use the
> stock
> distributor (advance and retard unhooked) with Petronix Ignitor and
> Flame
> Thrower coil with resistor wire converted to non-resistor type.  My
> question is
> ...would I benefit sufficiently powerwise by going to a non-stock
> distributor
> and if so, what is a good performance distributor for the TR6?
> Thanks for any input.
>
> Jim
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: http://autox.team.net/mailman/options/fot/triosan@gmail.com
>
>
>


-- 
Chuck Arnold and Kathleen Kelley