[Fot] TR3/TR4 frame cross brace ADJUSTABLE ALUMINUM CAMBER CONTROL ROD.

[Joe Alexander]

There would be two lengths of threaded tubes, one for TR3 and one for TR4.

After that there are differences with the bolt patterns of the mounting
brackets.

The biggest obstacle is moving it up in priorities for the initial production
run.

Joe Alexander


A. R. E.
645 1st Street
Jesup, Iowa 50648
319.464.4711  (cell)
n197tr4 at cs.com




-----Original Message-----
From: Randall <TR3driver at ca.rr.com>
To: 'Joe Alexander' <n197tr4 at cs.com>
Cc: fot <fot at autox.team.net>
Sent: Wed, Jul 4, 2012 11:07 pm
Subject: RE: [Fot] TR3/TR4 frame cross brace ADJUSTABLE ALUMINUM CAMBER
CONTROL ROD.


> Count me in if it fits a TR3 frame.

Me too.  But I think the TR3 is at least an inch or two narrower at that
point, so it would take quite a bit of range to cover both.

-- Randall