[Fot] TR4 upper head plugs

[toodamnfunky at comcast.net]

I think I'll go with the flow so to speak and do the pipe plugs. Thanks for all the input. 

jim g 



----- Original Message -----


From: "Bill Tobin" <william.tobin31 at verizon.net> 
To: "Jim Gray" <toodamnfunky at comcast.net>, "FOT" <fot at autox.team.net> 
Sent: Monday, December 31, 2012 9:16:54 AM 
Subject: Re: [Fot] TR4 upper head plugs 

Hi all, Happy New Year. 
I'm not sure about the TR4 head, but on my 6 where the heater hose pipe 
comes out the top of the head near the rear, I tapped it to 3/8 pipe and 
installed a reducer bushing and a petcock for bleeding out air from the 
system. If you just want a plug, various places sell Allen head pipe plugs 
in aluminum. Try Jegs or Pegasus. 
British pipe threads are vary close to NPT sizes and can be tapped to NPT 
sizes easily. I have a bunch of taps cluttering up my garage! 
Bill 
----- Original Message ----- 
From: "Jim Gray" <toodamnfunky at comcast.net> 
To: "'FOT'" <fot at autox.team.net> 
Sent: Sunday, December 30, 2012 11:22 PM 
Subject: [Fot] TR4 upper head plugs 


> Does anyone happen to know where to get the aluminum plugs in the top of 
> the 
> head ? 
> 
> Thanks as always 
> 
> jim g 
> _______________________________________________ 
> fot at autox.team.net 
> 
> http://www.fot-racing.com 
> 
> Donate: http://www.team.net/donate.html 
> Archive: http://www.team.net/archive 
> Forums: http://www.team.net/forums 
> Unsubscribe: 
> http://autox.team.net/mailman/options/fot/william.tobin31@verizon.net