[Fot] Wrist Pin / Piston Slap

[Tim Murphy]

Just out of curiosity (and not to start another thread on valve guide
clearance:)) what clearance were you running with the bronze guides?

Tim

-----Original Message-----
From: fot-bounces at autox.team.net [mailto:fot-bounces at autox.team.net] On
Behalf Of Richard Taylor
Sent: Wednesday, August 29, 2012 6:24 PM
To: FOT at autox.team.net
Subject: Re: [Fot] Wrist Pin / Piston Slap

At Road Atlanta, I had #4 exhaust valve bond to its bronze sleeve. The head
has new valves and guides and is back on the engine. Now, at an idle, there
is a wristpin (or piston slap) apparently damage caused when the two
elements united and was unlocked by the piston. Above 1250 RPMs, it goes
away. My thought is to simply put in a new piston, rings, wristpin and
connecting rod. 

If it is that simple, where can I order just one 89MM piston/wrist
pin/connecting rod?

Richard Taylor TR-4  #194
_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe:
http://autox.team.net/mailman/options/fot/timmurph@fastbytes.com