[Fot] Frozen trunnion bolt

[EDWARD BARNARD]

Tony: That is very common. The bolt rusts to the tubes inside the top-hat. The
bolt turns, but you can't pull it out because the OD of the tube is bigger
than the hole in the trunnion. If you can't PB Blaster it and then press out
in a press you'll need to cut the bolt head and nut off.
If you damage the trunnion let me know which side it is R/H or L/H and I'll
send you a good one.
-Ed-

--- On Sun, 8/26/12, Tony Drews <tony at tonydrews.com> wrote:


From: Tony Drews <tony at tonydrews.com>
Subject: Re: [Fot] Frozen trunnion bolt
To: fot at autox.team.net
Date: Sunday, August 26, 2012, 9:33 PM


By the way, it's frozen in the trunnion itself.  It turns within the
wishbones.

Tony

At 09:27 PM 8/26/2012, Tony Drews wrote:
>Anyone have any helpful hints on how to break a frozen trunnion bolt
>(TR-6 trunnion) free?  It's the bolt that goes through the lower wishbones.
>
>I've been doing heat, BP blaster, and an impact wrench...
>
>Thanks, Tony Drews
_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe:
http://autox.team.net/mailman/options/fot/edwardbarnard@prodigy.net