[Fot] Front Spring spacer length?

[Joe Alexander]

that's what i have used in the past  1/2  =  1

i did not realize the TR6 parts were significantly more stout.

thanks Chris.


Joe Alexander
A. R. E.
645 1st Street
Jesup, Iowa 50648
319.464.4711  (cell)
n197tr4 at cs.com




-----Original Message-----
From: Tony Drews <tony at tonydrews.com>
To: fot <fot at autox.team.net>
Sent: Wed, Aug 22, 2012 12:28 pm
Subject: [Fot] Front Spring spacer length?


I've got the TR-250 front suspension pieces now (thanks Joe!) and it
looks like they will lower my car about an inch.  Sooo, how much
spacer do I need to add to the spring to offset that?  I'm guessing
it's about a 2 to 1 deal, so 1/2" spacer would be an inch of ride height.

Anyone have something better than a guess for this?

By the way, the TR-250 (and 4A and 6) upright / vertical link is
significantly beefier than the TR-4 piece as has been mentioned on
the list.  The upper portion seems to be larger cross section as well
as the lower screw portion being larger in diameter.

Thanks in advance,
Tony Drews
_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: http://autox.team.net/mailman/options/fot/n197tr4@cs.com