[Fot] TR-4 vertical link and trunnion

[rdavis4 at cfl.rr.com]

I have a complete TR250/TR6 front suspension on the TR3. Keep in mind the TR4A - TR6 upper fulcrum pivot pins are a different diameter from the TR3 - TR4. TR4A - TR6 is 5/8 (same as the lower fulcrum pivot pins) and the TR3 and TR4 are 1/2. 

If you want pictures now is a good time. No fender or wheel to obstruct the view.

Bob


---- Tony Drews <tony at tonydrews.com> wrote: 
> Does the later TR-4a / TR-6 vertical link have a
> larger diameter section that screws into the Trunnion?
> 
> Tony
> 
> At 02:32 AM 8/20/2012, MadMarx wrote:
> >Tony,
> >
> >you better move on the later trunnion and link versions as they are more
> >rugged than the older TR3/4 ones.
> >I have installed a TR6 front suspension. There have to be some parts to
> >replaced to do that.
> >
> >I used the TR6 trunnion but with TR4 wishbones.
> >With this you need some spacers next to the trunnion to make it fit.
> >I can send photos if you like.
> >
> >Cheers
> >Chris
> >
> >-----Urspr|ngliche Nachricht-----
> >Von: fot-bounces at autox.team.net [mailto:fot-bounces at autox.team.net] Im
> >Auftrag von Tony Drews
> >Gesendet: Sonntag, 19. August 2012 23:07
> >An: fot at autox.team.net
> >Betreff: [Fot] TR-4 vertical link and trunnion
> >
> >Are the new Vertical Links and Trunnions from Moss any good?  This is for a
> >TR-4.  If not, anyone got a decent set of original ones they'd be willing to
> >part with?
> >
> >I broke a right front vertical link where it attaches to the lower trunnion
> >at Grattan this weekend.  That's kinda thrilling when it happens.
> >
> >Thanks in advance.
> >
> >Tony Drews
> _______________________________________________
> fot at autox.team.net
> 
> http://www.fot-racing.com
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: http://autox.team.net/mailman/options/fot/rdavis4@cfl.rr.com