[Fot] TR4 crank

[Tony Drews]

I measure 0.630", fine thread.  Must be 5/8".

Tony

At 06:26 AM 8/21/2012, trmarty at hotmail.com wrote:
>Anybody know off the top of your head what the thread size is in the 
>front of a, TR4 crank?
>
>Marty
>
>Sent via DroidX2 on Verizon Wirelessb"
>_______________________________________________
>fot at autox.team.net
>
>http://www.fot-racing.com
>
>Donate: http://www.team.net/donate.html
>Archive: http://www.team.net/archive
>Forums: http://www.team.net/forums
>Unsubscribe: http://autox.team.net/mailman/options/fot/tony@tonydrews.com