[Fot] Purolator oil relief valve leak 1962 TR4

[Peter Vucinic]

Mike,
Use a piece of solder wire from a coil of solder. Works perfectly. Have used
it for years with no leaks.


Kind Regards
Peter Vucinic
TR-4
_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums



-----Original Message-----
From: fot-bounces at autox.team.net [mailto:fot-bounces at autox.team.net] On
Behalf Of Mike Mehl
Sent: Saturday, 24 September 2011 2:18 PM
To: Randall; 'Triumph Friends of'
Subject: [Fot] Purolator oil relief valve leak 1962 TR4

I am still chasing the leak out of the oil pressure leak adjustment screw. 
After setting the oil pressure on my motor new for this season it has been
leaking all summer.  It looks to be part number 30123 washer.  No one seems
to
have them in their catalogs.   
 
Has anyone else had this type of leak?  Any
suggestions on how to fix/reduce the leak would be appriciated.
 
Thanks!! 
Mike Mehl
 

From: Randall <TR3driver at ca.rr.com>
To: 'Triumph Friends of'
<fot at autox.team.net>
Sent: Sunday, September 11, 2011 4:30 PM
Subject: Re:
[Fot] Purolator oil pressure regulator seal moss # 520-170 (TR4)

>  The seal
I
> referenced shows N/A in the Moss catalog.  Does anyone have 
> any
thoughts on
> fixing this leak?

TRF shows P/N 500328 in stock.

-- Randall 
_______________________________________________
fot at autox.team.net
http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive:
http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe:
http://autox.team.net/mailman/options/fot/mike.mehl@yahoo.com
_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe:
http://autox.team.net/mailman/options/fot/pvucinic@netspace.net.au