[Fot] Tranny synchros...

[Bob Kramer]

I bought some from Cambridge or Racetoratons a few years ago. They were made 
in Germany and were high quality and high dollar.

Don't forget to look through your spares for good, used OEM ones. The 
grooves on the inside cone are as important as the teeth.I've been able to 
put together a couple of good sets and in use they have worked better than 
the new ones the big three sell.

Bob Kramer
Volente, TX

Perfection is not attainable, but if we chase perfection we can catch 
excellence.
Vince Lombardi
----- Original Message ----- 
From: "J.C. Hassall" <jhassall at blacksburg.net>
To: <BillDentin at aol.com>
Cc: <fot at autox.team.net>
Sent: Tuesday, September 06, 2011 8:14 PM
Subject: Re: [Fot] Tranny synchros...


> On 9/6/2011 4:22 PM, BillDentin at aol.com wrote:
>> Amici...
>>
>> Can anyone recommend a source for 'decent' synchros for the TR4 tranny?
>> Accent on the 'decent'.  Thanks.
>>
>>
> Bill, I bought a set from BFE a few years back, which have much more 
> "grab" at less engagement than the usual culprits.  In fact, I had to lap 
> them in slightly to make the gbx shift easier.  In short, spendy parts but 
> well worth the $.
>
> j
>
> -- 
> Jim Hassall
> Blacksburg VA
> '63 TR4 in autox preparation
> 99% finished, 90% to go
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: 
> http://autox.team.net/mailman/options/fot/rkramer3@austin.rr.com