[Fot] FW: FW: Crank-scraper Triumph TR7

[Barry Munson]

Amici - FYI - if anyone is looking for a crank scraper-windage tray for a
TR7 engine Kevin is a useful resource to check out. I had him make a crank
scraper- windage tray and baffle for the TR3. Superb engineering, fit and
finish. Based on this product I ordered one for the Volvo. Absolutely no
NFI.
Barry.


-----Original Message-----
From: Kevin Johnson [mailto:Kevin_Johnson at crank-scrapers.com] 
Sent: November-02-11 11:17 AM
To: Barry Munson
Subject: RE: FW: Crank-scraper Triumph TR4 tracking number

Hi Barry,

Yours will be sent shortly (the fifth of seven sets that I have cut).   
Thanks for being patient.

If you know anyone with the TR-7 type engine, I am working on patterns  
for that.  Hopefully the head on the core I have will not be locked on.

Kind regards,

Kevin


-- 
Ishihara-Johnson Crank Scrapers
Http://www.crank-scrapers.com
(727) 808-8602
(727) 868-3013 FAX

CONFIDENTIALITY NOTICE: The materials in this electronic mail transmission
  (including all attachments) are private and confidential and are the
  property of the sender. The information contained in the material may be
  legally privileged and is intended only for the use of the named
  addressee(s). If you are not the intended addressee, be advised that any
  unauthorized disclosure, copying, distribution or the taking of any action
  in reliance on the contents of this material is strictly prohibited. If
you
  have received this electronic mail transmission in error, please
immediately
  notify the sender by telephone or electronic message and thereafter,
destroy
  it immediately.



Quoting Barry Munson <barry at penybryn.ca>:

> Hi Kevin - Could you please give me an update on this order. Ordered
August
> 03, paid for August 04.
> Thanks.
> Barry.
>
> -----Original Message-----
> From: Barry Munson [mailto:barry at penybryn.ca]
> Sent: August-03-11 10:49 AM
> To: 'Kevin Johnson'
> Subject: RE: FW: Crank-scraper Triumph TR4 tracking number
>
> Hi Kevin - Thanks for the information below. I would like to order both
the
> windage tray and scraper for the Volvo B20 engine. Do still have my card
> info, if not, I'll phone it in. Could you please give me an estimated
> delivery time - only have one race left this season so this will be part
of
> the winter rebuild.
> Thanks.
> Barry.
>
> -----Original Message-----
> From: Kevin Johnson [mailto:Kevin_Johnson at crank-scrapers.com]
> Sent: April-17-11 12:33 PM
> To: Barry Munson
> Subject: RE: FW: Crank-scraper Triumph TR4 tracking number
>
> Hi Barry,
>
> I have attached a pic of the windage tray for that engine ($199.95) and
the
> website shows the general steel dual scraper (look at the B230 but the
> counterweight cutouts are a little different) $109.95.
> http://www.crank-scrapers.com/Volvo.html
>
> The P1800 is a nice car design.
>
> Shipping weight will probably be about 8 pounds.
>
> Kind regards,
>
> Kevin
>
>
> --
> Ishihara-Johnson Crank Scrapers
> Http://www.crank-scrapers.com
> (727) 808-8602
> (727) 868-3013 FAX
>
>
> Quoting Barry Munson <barry at penybryn.ca>:
>
>> Hi Kevin - Thanks for the info. Everything fits perfectly. Once the new
> oil
>> pump pickup arrives from Greg Solow I may have one additional question.
>> This is one fine "piece of kit". So much so that I would like to do
>> something similar to my primary race car (this is the car that has been
>> getting the living snot beat out of it every year since 1980)  - a 1970
>> Volvo P1800 with a B20 motor. I noticed on your web site that you have
>> developed something for this application. Could you please provide me
with
>> what you would recommend and a quote for the options.
>> Thanks very much.
>> Barry.