[Fot] spitfire vs GT6 front upright

[Gt6steve at aol.com]

I would expect them to be different but can't say for sure.  I can get  
exact measurements for a GT6 stub axle if that will help.  Anybody got a  free 
Spitty one laying around?
 
 
In a message dated 5/27/2011 3:31:37 P.M. Pacific Daylight Time,  
spitlist at cox.net writes:

I don't  know the specific differences but they do carry different  part
numbers.  The late Spit uprights are PN GSJ265 and 266, while the  GT6 PNs
are GSJ264 and 267.  The differences may be just in the  finished pieces and
the Spit ones may be  upgradeable.

Joe

-----Original Message-----
From:  fot-bounces at autox.team.net [mailto:fot-bounces at autox.team.net] On
Behalf Of  Enquiries Road & Track
Sent: Friday, May 27, 2011 2:21 PM
To:  fot at autox.team.net
Subject: [Fot] spitfire vs GT6 front upright

can  anyone confirm if the taper machined into in the late model front
upright  (ie the type without a "hole" for the steering arm), is the same 
GT6
and  Spitfire.???> The Gt6 uses bigger bearings and a bigger stub axle  to
match, and i think, a different taper. would like 100% confirmation  if
possible
Terry
_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate:  http://www.team.net/donate.html
Archive:  http://www.team.net/archive
Forums:  http://www.team.net/forums
Unsubscribe:  http://autox.team.net/mailman/options/fot/spitlist@cox.net
_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate:  http://www.team.net/donate.html
Archive:  http://www.team.net/archive
Forums:  http://www.team.net/forums
Unsubscribe:  http://autox.team.net/mailman/options/fot/gt6steve@aol.com