[Fot] SU vs Stromberg

[Alexandre Camoletti]

Yes, in fact checked on sucarb.co.uk and they have new needle seats with
.125'' bore (ref VZX1090), which is a substantial improvement over stock.
Also one may try to fit smaller floats (the ones of H2), meaning more fuel
in the chamber at all times, therefore able to face a surge with more
comfort.
Let me know your thoughts Amici!
Mr Kastner, at the time when you drilled the needle seats to what ID did you
go to?
Cheers!
Alex

-----Message d'origine-----
De : fot-bounces at autox.team.net [mailto:fot-bounces at autox.team.net] De la
part de Randall
Envoyi : jeudi 17 mars 2011 00:01
@ : fot at autox.team.net
Objet : Re: [Fot] SU vs Stromberg

> You may try enlarging the needle seat hole, a  trick recommended by
> Kas, and now SU provides as well needle floats of larger ID up to
> .110'' if I remember correctly ; see www.sucarb.co.uk Cheers! Alex

For those in the USA, you might check with Moss Motors.  Their rep mentioned
at TRfest that they had to use the larger float valve to get adequate fuel
flow for the TR4 blower setup.  That may mean they have the valves available
for sale separately as well.

-- Randall
_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: http://autox.team.net/mailman/options/fot/ac@camoletti.ch