[Fot] GT-6 & Spitfire Parts

[Gt6steve at aol.com]

Have you set any prices yet?
 
 
In a message dated 3/14/2011 10:11:27 A.M. Pacific Daylight Time,  
rodkent at cox.net writes:

Hello,  due to the acquisition of another vintage racer I am going to have 
to abandon  by GT-6 build that I had begun. A dear freind of mine passed 
away last year  and when his son decided to sell his dad's Lotus 7, I had to 
buy it for  sentimental reasons more than anything else. Plus we still 
campaign my TR-6 in  selected events, plus my 33 highboy, project, plus the 
chopper, plus the  Datsun 2000 project, you get the picture. Anyway I had started 
accumulating  engine parts, wheels, etc. I need to sell off. Things I need to 
unload  are:
2 Jerry Barker prepped cranks, nitrided, ground to use Honda rod  bearings, 
x-drilled, etc.
1 Set Pauter rods for same
1 Set Arias pistons  to be used with this combination
1 SA9 Crank, ground on new cam blank
4  New Pansports 6 x 13  4 3/8 backspacing (minimum scrub  radius)
Fiberglass bonnet for gt-6 
Not a Vintage part, but I also have  a Schwitter gearbox for any serious 
production car
This engine  configuration is as described in Mr Kastner's latest book when 
describing  Chuck's build.
Email me with any questions.
thanks,  rod
_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate:  http://www.team.net/donate.html
Archive:  http://www.team.net/archive
Forums:  http://www.team.net/forums
Unsubscribe:  http://autox.team.net/mailman/options/fot/gt6steve@aol.com