[Fot] Turner racer looking for help...

[BillDentin at aol.com]

Amici...

A fellow SVRA/VSCDA racer name John Ruth contacted me looking for help with 
fasteners for TRIUMPH wire wheel adapters.  I have zero knowledge 
concerning wire wheels for TRIUMPHs.  Can anyone help him?  His request appears 
below, including his email address (and in the Copy to; box as well).  Thanks.  
Bill Dentinger 

<<<-Hello Bill
 
Hoping you can help - I have a Turner Mk III that uses a lot of Triumph 
parts - one part I am trying to get confirmation on is the nuts that hold the 
knock-off adapter onto the hub.   My Turner has special hex nuts that have a 
conical seat (or bottom )  - the Turners were made with all kinds of other 
companies components - though I suspect the nuts in question were sourced 
from Triumph.  As mentioned, the Hex nuts are special ones that have a conical 
bottom to seat onto the hub (after the nut is tightened onto the stud and 
bears against the hub).  I know you race a TR3 and hope you can confirm the 
type (design) of the special nuts to attach the knock-off extension to the 
hub.  I need to get hold of some new nuts - since 4 of mine parted company with 
the car!  John Ruth (jdruth at att.net) ->>>