[Fot] Southwick axle pushing out gear oil from Right Rear (TR4)

[Joe Boruch]

Mike, there is an O-ring on the outer periphery of the bearing. The O-ring may
be cut and leaking or missing?  These are also sealed bearings.  You may have
had a seal failure, in which case you would need to replace the bearing.  This
is Moser part number 9507F.  Joe(B)

---------- Original Message ----------
From: Mike Mehl <mike.mehl at yahoo.com>
To: Triumph Friends of <fot at autox.team.net>
Subject: [Fot] Southwick axle pushing out gear oil from Right Rear (TR4)
Date: Sun, 10 Jul 2011 20:59:35 -0700 (PDT)

My axle (just over a year and about 6 race hours old) is pushing oil out
through end of the axle - right side.  The left rear is dry as a bone.  Has
anyone else had this type of issue?  If so how did you fix it.

Mike Mehl #46

The good news is I have run the car three race weekend with normal problems
(not spun bearings).

Thanks!!!!!!!
_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: http://autox.team.net/mailman/options/fot/jaboruch@netzero.net


____________________________________________________________
57 Year Old Mom Looks 27!
Mom Reveals $5 Wrinkle Trick That Has Angered Doctors!
http://thirdpartyoffers.netzero.net/TGL3231/4e1b008f1c4293397cdst06duc