[Fot] EGT Meters, Faulty?

[Joe Boruch]

The lead should not be an issue, but like anything they can go bad.  Make sure
that the wire connections are all clean.  It would not take much corrosion to
change the readings.  Only use the original connections and wires.  Joe(B)

---------- Original Message ----------
From: Bobby Whitehead <igofaster at att.net>
To: FoT Triumph <fot at autox.team.net>
Subject: [Fot] EGT Meters, Faulty?
Date: Wed, 26 Jan 2011 19:23:15 -0800 (PST)

Would E.G.T. probes become faulty over 2-3 years running leaded 110 octane?
I've
rebuilt my engine, fabricated another intake manifold for my rebuilt Joe
Curto
carburetors and still have mixed up readings. Too hot or too low registration
between 1 cylinder and 6 cylinder readings.


Bobby Whitehead
_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: http://autox.team.net/mailman/options/fot/jaboruch@netzero.net


____________________________________________________________
$65/Hr Job - 25 Openings
Part-Time job ($20-$65/hr). Requirements: Home Internet Access
http://thirdpartyoffers.netzero.net/TGL3231/4d42208e6db8f9d01est02duc