[Fot] [6pack] Oil Filter Adapter

[Andre Rousseau]

Go with the K&N filters.

Anti drain back valve.

Following filters will work with the GT6 spin on and clear the steering
shaft.

Oil Filter  Fram CHP3682, K&N's # HP1002
http://gt6.ca/08/0525/slides/DSCN3605.html

You have to remove the whole setup to do a filter change, but still
works decent.
Oil cooler setup is slight more involved.

http://gt6.ca/07/0919b/slides/DSCN2633.html with Fram (I use for winter
storage)

A.

On 21 February 2011 05:48,  <TRDOCTOR at aol.com> wrote:
> I was trying to eliminate the drain back of oil when not running, but, I
> guess that I will just stick with the canister even though it is a PITA to
> change the filter.  I'll just make sure that I have a good filter.   The
one
> I put in there was a VB brand (whatever that is) but in the future I  will
> stock up on some others.
> When we bought the car I was sure that it was the same filter as the TR6,
 s
> ince it is the same configuration, but that turned out not to be the  case.
>  The TR6 filter is bigger in diameter and deeper.
> Sam and Carol Clark
> Green Country Triumphs (Tulsa)
>
> Just stick with the original filter. My mechanic says they're better for
> many
> reasons. I know lots of folks love the spin on, so I'm not trying to  start
> a
> big thread on which is better. Just my opinion.
>
> Sloane  :)
> 69-Six
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: http://autox.team.net/mailman/options/fot/andre@gt6.ca
>
>
>



--
Andre Rousseau - andre at gt6.ca
http://twitter.com/andrerousseau - http://andrerousseau.wordpress.com/
'68 Triumph GT6 MK1 - http://www.gt6.ca/
#515 FIAT 124 Spider  - http://www.124racer.com/
Ottawa, ON, Canada