[Fot] Oil Filter Adapter

[RACER BUD]

You need to be sure to screw the threaded post in far enough so that the 
filter rubber is flush/tight to the adapter so that the oil filter can 
tighten snuggly to the rubber ring..RB
----- Original Message ----- 
From: <TRDOCTOR at aol.com>
To: <tr6 at atlasok.com>
Cc: <fot at autox.team.net>; <thomaschronister at cox.net>; <akgraves at cox.net>; 
<6pack at autox.team.net>; <triumphlist at autox.team.net>
Sent: Friday, February 18, 2011 6:53 PM
Subject: [Fot] Oil Filter Adapter


>I finally gave up on the oil filter adapter on the GT6 and put the canister
> back on.  It wasn't fun taking the adapter off or putting the canister
> back  on but it is done and the canister doesn't leak, at least right now.
> We'll  see what happens.
> This is what happened with the TR6 when I first put on an adapter.   Tried
> one a few years later from a different vendor and manufacturer.  No
> problems with it now.  I bought the new adapter from a major supplier (the 
> one for
> the GT) but it just would not quit leaking.
>
> Sam
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: 
> http://autox.team.net/mailman/options/fot/budscars@comcast.net