[Fot] Group 44 TR6 suspension question

[Robert M. Lang]

Hi,

I've looked at that suspension quite a bit.

Gp 44 / Bill Warner installed some spring buckets to the upper spring 
perch - I forget if they use jacking screws or not, but the bucket is 
sized for 2.5" springs (or some stock dimension spring)

That's pretty much it.

They then use some really, really hefty shocks (telescoping type) mounted 
to the roll cage and to the stock lower mounting ear on the trailing arm. 
NOTE: YOU NEED GUSSETS ON THE TRAILING ARMS!!!

I probably have pix somewhere. ;-)

regards,
rml
---------------------------------------------------------------------------
Bob Lang              Triumph TR6!!            |  This space for rent
Former NER Solo Chair                          |
Voice:617-253-7438                             |  Cell: 339-927-4489
---------------------------------------------------------------------------