[Fot] solid graphite intake/exhaust

[Tony Drews]

I've got a few of the solid graphite intake / exhaust gaskets for the 
high port head.  It's all I use - Jack used to sell them.

They are probably 3/16" thick (or so), and they are compressible so 
they seal where none of the other gaskets will seal.  If the normal 
gaskets work, you don't need these.  If you have a slightly warped 
header or just have problems sealing the header (or intake for that 
manifold), these are the fix.  They are not reusable, and they're not 
exactly cheap, but sure cheaper than a new header.

I can do $70 including shipping in the continental US - the last 
batch I had made was less expensive than last time around (maybe I 
ordered more?).

- Tony Drews

At 08:11 PM 2/7/2011, Greg & Alison Blake wrote:
>Do you still have these intake/exhaust gaskets for the TR3/4 motor?  What
>are the benefits costs.
>
>Thanks,
>
>Greg
>
>-----Original Message-----
>From: fot-bounces at autox.team.net [mailto:fot-bounces at autox.team.net] On
>Behalf Of SpiwakD at aol.com
>Sent: Wednesday, October 13, 2010 12:23 PM
>To: fot at autox.team.net
>Subject: [Fot] Copper head gasket source?
>
>Need source for all-copper head gasket and solid graphite intake/exhaust
>gaskets
>
>Dave Spiwak spiwakd at aol.com