[Fot] Moving Valve Guide - how to fix?

[Joe Boruch]

There are a couple of ways to fix this.  You can have an oversized guide
installed or if the guide is soft enough you can have it knurled and then
reinstalled.  Loctite sleeve retainer would be a good idea to help keep it in
place.  Joe(B)

---------- Original Message ----------
From: Scott Janzen <sjanzen at me.com>
To: 'Friends of Triumph' Triumph <fot at autox.team.net>
Subject: [Fot] Moving Valve Guide  - how to fix?
Date: Fri, 04 Feb 2011 10:49:14 -0500

Doing some winter maintenance, I noticed that one of the intake valve
guides has shifted down into the port about 1/4".  What's the
appropriate fix for this, assuming the guide is a standard diameter?
Reassemble with red loctite, JB weld, or ?
_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: http://autox.team.net/mailman/options/fot/jaboruch@netzero.net


____________________________________________________________
$65/Hr Job - 25 Openings
Part-Time job ($20-$65/hr). Requirements: Home Internet Access
http://thirdpartyoffers.netzero.net/TGL3231/4d4cb47bc71fa1e1eb5st01duc