[Fot] I Need a TR6 Intake manifold?

[william r tobin]

Henry, measure the distance between the intake ports.
Older heads should be about 1/2 inch between ports. Newer ones about an 
inch.
I may have a spare. Let me know the size.
Thanks, Bill
----- Original Message ----- 
From: "Henry Morrison" <dos_gusanos at msn.com>
To: "fot" <fot at autox.team.net>
Sent: Saturday, December 03, 2011 9:25 AM
Subject: [Fot] I Need a TR6 Intake manifold?


> Greetings Enthusiasts, Got my oil control ring expanders installed, and 
> the
> latest rub is that I guess I have replaced my cracked head with the later
> style and I believed the intake ports were higher or lower on the later 
> head
> but upon examination it seems they are instead further apart.  I matched 
> all
> the gaskets up but it can't be a good setup, so I'm in the market for a 
> new
> intake manifold and I guess whatever else might be involved.
>
> Extra parts I have available are several manifold gaskets and a complete 
> set
> of steel guides.
>
> Cheers, Henry Morrison, snowy Cedar Crest, New Mexico
>
> ( I finally sent in an order big enough to the Roadster Factory to get a 
> free
> coffee mug, quite an achievement, don't tell the wife.)
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: 
> http://autox.team.net/mailman/options/fot/william.tobin31@verizon.net