[Fot] Crank case evacuator question

[MadMarx]

Hi Chuck,

I've glued a shield in place to have no mist.
I don't use a breather cap just the normal cap that came with the cover.

Cheers
Chris

-----Urspr|ngliche Nachricht-----
Von: fot-bounces at autox.team.net [mailto:fot-bounces at autox.team.net] Im
Auftrag von Chuck Arnold and/or Kathleen Kelley
Gesendet: Freitag, 26. August 2011 19:20
An: Friends
Betreff: [Fot] Crank case evacuator question

Having finally just read Kas' new book, and having talked to Joe at the
Laguna Cup race, I decided to install a crankcase evacuator system.  So now:

1. I have a Triumphtune Rocker cover.  There is a hole for the vent, but no
filtering whatsoever.  Will I get a lot of oil/mist sucked into the
exhaust?
2. If so, what is a good solution.  The breather cap that came with the Kit
[from Mr Gasket] will not fit under the hood with the hose attached even if
I put it as close as possible to the firewall [TR6].
3. Since these kits are for a V8 I have half of one left over.  Glad to
share it with anyone desiring to do this modification.

Thanks,


--
Chuck Arnold
_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe:
http://autox.team.net/mailman/options/fot/tr4racing@googlemail.com

[demime 1.01d removed an attachment of type image/jpeg which had a name of DSC01641.JPG]