[Fot] TR4 - Caster - Camber - Toe

[Bill Babcock]

Two to 2.5 is plenty for Speedsters, which seem to be a bit more like halfway
between radials (and certainly not slicks) and bias ply.
If your Triumph is faster than a well prepped rabbit you're doing well.

On Aug 4, 2011, at 12:09 PM, Mike Mehl wrote:

> I have been working on getting some camber into my car so the Speedsters
will
> work a little better.  I am putting the parts together this weekend. I am
> aiming for between 2 and 3 degrees of negative camber.  What do you guys
run
> for toe and caster (if I can get some with out binding)?  The only thing I
> have to compare is the Rabbit which we run toed out and 3 degrees of
negative
> camber.  It is pretty darty but runs the same lap times at Seattle and
> Portland as a fast TR4 (so I am faster in the Rabbit than my TR4).  I am
> hoping to change that.
>
> Looking for feedback.
>
> thanks!!!
>
> Mike Mehl #46
> TR4
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: http://autox.team.net/mailman/options/fot/billb@bnj.com