[Fot] Carrillo TR3-4 rods torquing

[Alexandre Camoletti]

Amici ! Currently building a TR3/4 engine with Carrillo rods. 

The set came with the stock Carrillo bolts (called by them WMC/H11) and the
tech sheet says they must be torqued max 40lbs.

While the stock rods and bolts usually are torqued at 60 lbs.

So should I torque the Carrillos at 40 or 60 lbs then ?

Amici, thank you for your very valuable input (as always)!

Cheers

Alex