[Fot] Seating Rings

[REK46 at aol.com]

Totally agree with Chuck.....Marvel does it well with CI rings
 
 
In a message dated 4/23/2011 4:06:17 P.M. Eastern Daylight Time,  
chasgee at aol.com writes:

A thin  coat of Marvel mystery oil on the cylinder walls - seats the  rings
fast.

Chuck

-----Original Message-----
From: marty  sukey <trmarty at hotmail.com>
Sent: Saturday, April 23, 2011 10:35  AM
To: FOT <fot at autox.team.net>
Subject: [Fot] Seating  Rings

As I get ready to start putting the Spity engine back together I  have a
question.  Piston rings are the cast iron variety. In the past  I have just
coated the pistons and cylinder walls with some engine oil  prior to
insertion.
I was talking to an old timer at the machine shop  and he said he uses 90 wt
gear oil on the cylinder walls and leaves the  pistons dry.  What do you
experts use? Does it make any difference? I  do want the rings to seat and I
was thinking thinner was better but maybe I  am wrong.  What say  ye?

Marty
_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate:  http://www.team.net/donate.html
Archive:  http://www.team.net/archive
Forums:  http://www.team.net/forums
Unsubscribe:  http://autox.team.net/mailman/options/fot/chasgee@aol.com
_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate:  http://www.team.net/donate.html
Archive:  http://www.team.net/archive
Forums:  http://www.team.net/forums
Unsubscribe:  http://autox.team.net/mailman/options/fot/rek46@aol.com