[Fot] Spitfire clutch slave cylinder travel?

[RACER BUD]

Scott..a stock rod is fine...If you have gone to a different clutch disc, 
you may need small spacers(washers) between the pressure plate and the 
flywheel...1/4" washer makes a Huge difference..that's what I have on my 
Spitfire.(I went thru the whole deal of thinking i needed a different length 
rod)
Racer Bud
----- Original Message ----- 
From: "Barr, Scott" <sbarr at McCarty-Law.com>
To: <fot at autox.team.net>
Sent: Thursday, April 14, 2011 5:14 PM
Subject: [Fot] Spitfire clutch slave cylinder travel?


> Anybody have an idea of the proper/necessary distance for the travel of 
> the clutch slave cylinder rod?  How far should the rod move to fully 
> disengage the clutch?
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: 
> http://autox.team.net/mailman/options/fot/budscars@comcast.net