[Fot] Torque specs needed ASAP!

[Barr, Scott]

The ARP instruction sheet should come into play here.  Mine says 40 lb/ft with ARP Moly Lube or 60 lb/ft with 30 weight.


----- Original Message -----
From: fot-bounces at autox.team.net <fot-bounces at autox.team.net>
To: Friends of Triumph <fot at autox.team.net>
Sent: Fri Apr 01 19:29:37 2011
Subject: [Fot] Torque specs needed ASAP!

I'm hoping someone will have a good idea of what torque to use for
fastening the flywheel to Susan's 1300 Spitfire motor.  It has a
Moldex crank, aluminum flywheel and ARP bolts with ARP washers.  The
thread size is 3/8x24.  I will also be using loctite during the
install.

Any suggestions on torque spec?

Thanks!

Brad
_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: http://autox.team.net/mailman/options/fot/scott.barr@mccarty-law.com