[Fot] Corner weights

[Scott Janzen]

I shimmed one side of the transverse leaf spring on the GT6 where it  
bolts on top of the differential.  Used cut-down stainless steel  
backing shims from disc brakes.  Worked great and relatively painless  
to do.
Shimming the front coil springs will be a bit more trouble, but the  
results were well worth the effort on my car.

On Sep 28, 2010, at 1:33 AM, Tony Drews wrote:

Also, we can use shims between the rear axle and the spring as Kas  
described for the original cars.

- Tony

At 06:19 PM 9/27/2010, Joe Boruch wrote:
> Dave, You could put shims between the front spring pan and the lower  
> A-arms to
> lower the front corner of the diagonal that is too heavy.  You can  
> also move
> weight around in the car.  For example. place the battery closer to  
> the light
> rear corner.  Joe(B)
>
> ---------- Original Message ----------
> From: SpiwakD at aol.com
> To: fot at autox.team.net
> Subject: [Fot] Corner weights
> Date: Sun, 26 Sep 2010 20:35:47 EDT
>
> How can we adjust corner weights without having coil  springs?
> _______________________________________________
> fot at autox.team.net
_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: http://autox.team.net/mailman/options/fot/s.janzen@comcast.net