[Fot] Nitriding cams

[Greg Solow]

The hardchrome gives a very hard and durable surface to the crank journals. 
It does not add any strength or resistance to cracking, as does Nitriding.
                                                                             
                        Greg Solow
----- Original Message ----- 
From: "Justin Wagner" <jmwagner at greenheart.com>
To: <fot at autox.team.net>
Sent: Sunday, September 19, 2010 1:01 PM
Subject: Re: [Fot] Nitriding cams


> Back in the early 80's, I had a crank worked on through a machine shop
> that was working on Formula 1 at the time.   They had it ground
> undersize, and then chromed oversize and ground to standard.
> I ended up never building that motor, but I've been saving that crank
> and other components for my current street TR4A, for when a rebuild
> comes along.
>
> What's the thoughts on that process versus nitriding?
>
> --Justin
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: 
> http://autox.team.net/mailman/options/fot/gregmogdoc@surfnetusa.com
>
>


--------------------------------------------------------------------------------



No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.445 / Virus Database: 271.1.1/3145 - Release Date: 09/19/10 
06:34:00