[Fot] thick manifold gasket TR6/GT6

[Mike Munson]

Bobby,
What Scott said. I coat mine with Hylomar so they will release for reuse.
Mike
To: Bobby Whitehead <igofaster at att.net>
Cc: FoT Triumph <fot at autox.team.net>
Sent: Wed, September 8, 2010 1:27:10 PM
Subject: Re: [Fot] thick manifold gasket TR6/GT6

PRI has some great ones that I have been using for several years.  You  
can get several assembly/disassembly cycles out of them.  They are  
some sort of thick, grey, very dense material. He does not always have  
them in stock, however.

On Sep 7, 2010, at 9:07 PM, Bobby Whitehead wrote:

Been chasing down vacuum leaks on the GT6 carburetors. First the back  
one leak,
then the front, then the back.... argh..

The GT had a smaller gasket cut for the intake manifolds mating to the  
header
flange. It's been back and forth. I cut a thinner gasket up and a  
thicker gasket
up to try to chase down the leak...

I think if I can locate the thicker manifold gaskets and cut one up  
for the
intake side, I might be able to kill the gremlin..

Who has the line of thicker manifold gaskets?
Joe? Ted?
Bobby Whitehead

GT6+
_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: http://autox.team.net/mailman/options/fot/s.janzen@comcast.net
_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: http://autox.team.net/mailman/options/fot/fasttrs@yahoo.com