[Fot] Accusump
Bill Babcock
billb at bnj.com
Tue Sep 7 09:52:37 MDT 2010
If you have a connection straight to the engine oil gallery then there isn't
much reason for all that plumbing and a one way valve that might cause
problems. I just plumb the accusump straight to the gallery. Done. If you use
a mechanical ball valve you need to be a bit careful opening the valve unless
you know the accusump has lots of pressure because you'll steal pressure from
the gallery. If you open and close the valve briefly you'll see the engine oil
pressure dip as you rob oil from the gallery, but doing that a few times
equalizes the pressure quickly, and the valve and line are so big that
pressure increases with RPM happen almost as quickly as without the accusump.
The electric valves have a flow limiting mechanism that limits how much oil
the system can rob.
I'm a big fan of simple--no oil thermostat, no one way valve., no T's. Just a
line from the filter adapter to the oil cooler and back, and one line for the
accusump.
On Sep 7, 2010, at 3:30 AM, Chuck Arnold and/or Kathleen Kelley wrote:
> I hooked up five of the oil gallery ports to a manifold fed from a T as
> others have describe. Plembing setup is like this:
> Oil filter to Thermostat [then to oil cooler then to from oil cooler to
> thermostat] from thremostat to one way valve to a T. One side of T to
> Accusump, other to the manifold [referred to by KAs as the "octopus"]. An
4
> lines from maifold to AN4-1/8 npt to adapters in oil gallery.
>
> Annotated photos are available at:
> http://picasaweb.google.com/Triosan/OilGalleryPlumbing#
>
> On Tue, Sep 7, 2010 at 12:44 AM, <n197tr4 at cs.com> wrote:
>
>> Andre,
>>
>> Please send photos to Sean, too.
>>
>> seanax at iowalaser
>>
>> Thanks for the contribution to the list, once again.
>>
>> Joe
>>
>>
>>
>>
>>
>>
>>
>> -----Original Message-----
>> From: WILLIAM TOBIN <william.tobin3 at verizon.net>
>> To: fot at autox.team.net
>> Sent: Sat, Sep 4, 2010 4:56 pm
>> Subject: [Fot] Accusump
>>
>>
>> Guys, thanks for all the info and advice on the Accusump.
>> ndre, great photos, thanks.
>> ow to order all the bits I need.
>> hanks again, Bill
>> ______________________________________________
>> ot at autox.team.net
>> http://www.fot-racing.com
>> Donate: http://www.team.net/donate.html
>> rchive: http://www.team.net/archive
>> orums: http://www.team.net/forums
>> nsubscribe: http://autox.team.net/mailman/options/fot/n197tr4@cs.com
>> _______________________________________________
>> fot at autox.team.net
>>
>> http://www.fot-racing.com
>>
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe: http://autox.team.net/mailman/options/fot/triosan@gmail.com
>>
>>
>>
>
>
> --
> Chuck Arnold and Kathleen Kelley
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: http://autox.team.net/mailman/options/fot/billb@bnj.com
More information about the Fot
mailing list