[Fot] Fwd: Accusump

[Bill Babcock]

Oops, too long

Begin forwarded message:

> From: Bill Babcock <billb at bnj.com>
> Date: September 7, 2010 9:51:15 AM PDT
> To: Fubog1 <fubog1 at aol.com>
> Cc: triosan at gmail.com, seanax at iowalaser.com, fot at autox.team.net
> Subject: Re: [Fot] Accusump
> 
> Not significantly if you go in through the gallery. If you're in the cooler line, sure, but if not, not so much. The bleed down rate for the Accusump is pretty slow, restricted as much by the small gallery hole as anything else, but it maintains more than 20 pounds of engine oil pressure measured at the gallery for at least 30 seconds. That's all I want. That and the ability to pre-oil the motor before each start. 
> 
> On Sep 7, 2010, at 9:29 AM, Fubog1 wrote:
> 
>> without the check valve, some of the charge is going to want to back up through the pump, so it is reducing the effectiveness of the thing...
>> FWIW
>> Glen