[Fot] re TR4-6 steering arm differences

[Larry Young]

Interesting that you should mention bump steer.  My TR3A originally had 
the stock 0 degree caster A arms.  I measured some very bad bump steer 
with the original suspension.  I then rebuilt the suspension and 
installed shortened 3 degree A arms.  I measured very little bump steer 
with the final setup, so I didn't change the steering arms. I suppose 
this data point just confuses the issue.
-Larry

On 10/24/2010 4:57 PM, Enquiries Road & Track wrote:
> the steering arms for zero&  3 degree caster are quite different to
> look at , but i dont have any bump steer data as yet to work out the
> improvements
>
> Terry O'Beirne