[Fot] Fitting in a GT6

[Andre Rousseau]

Yeah I did the nascar door bars on my racer too.
I can tell you this.
There is no way I'd be able to load a GT6 onto my trailer :)
With the FIAT I drive up onto the trailer and then jump straight out
over top of the roll cage.

Just a little too tall to make the dream come true. Drat.
Never the less I made the vintage racing dream come true :)

One advantage of an open top car.
http://www.124racer.com/gallery/10/0214_Tig_Cage/slides/IMG_2418.JPG

A.

On 13 October 2010 09:56, Bobby Whitehead <igofaster at att.net> wrote:
> Having owned nearly 20 GT6's and now owning a racer. I too can confirm the
small
> space to get into the car. This year I added the full roll cage and was
> concerned on being able to get into and out of the car. I was lucky enough
to
> find Jason down in Cresson Texas at the MSR track. I can get his contact if
> interested. He built a cage specifically where the side bars (2) are shaped
into
> the inner space of the doors. We were able modify the inside door skins by
> cutting them out to fit. I admit, it's a bear to get into. But, when
exiting,
> once my butt is on the top bar of the I'm literally out of the car by then.
> However, once inside, I'm very cozy at 5'9" and STILL 199 pounds.
>
> Bobby Whitehead
> CVAR GT6+ Group 7 DP
>
> Happy Motoring!
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: http://autox.team.net/mailman/options/fot/andre@gt6.ca
>
>
>



--
Andre Rousseau - andre at gt6.ca
http://twitter.com/andrerousseau - http://andrerousseau.wordpress.com/
'68 Triumph GT6 MK1 - http://www.gt6.ca/
#515 FIAT 124 Spider  - http://www.124racer.com/
Ottawa, ON, Canada