[Fot] H6 flosts (again)

[Tim Murphy]

There is a solution.  A fella by the name of Harold Baker made some floats
of the proper dimensions and weight out of aluminum with an o-ring seal at
the top for Bill Dentinger and Bob Wismer.  They were painstakingly made by
Harold.  Bill and Bob have graciously lent me some of the prototypes so I
can get the dimensions from them.  My plan is to talk to a friend of mine
who has a machine shop with CNC milling machines and see if I can't make the
programs and fixtures to "mass produce" this type of float from aluminum bar
stock.  You have now given me some motivation to get off of my butt and get
going on this "winter" project.  I will post occasional updates on my
progress, or lack thereof.

Tim

-----Original Message-----
From: fot-bounces at autox.team.net [mailto:fot-bounces at autox.team.net] On
Behalf Of Greg & Alison Blake
Sent: Saturday, October 09, 2010 9:04 AM
To: fot at autox.team.net
Subject: [Fot] H6 flosts (again)

In know there has been a bunch of discussion in the past on this topic (over
a thousand hits on a team.net search), but did any one every come up with a
solution to the sinking float issue?  It seems dad's TR4 is going through a
float per race.

 

Thanks in advance,

 

Greg 
_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe:
http://autox.team.net/mailman/options/fot/timmurph@fastbytes.com