[Fot] Brake caliper sealing rings

[tylerpthompson at yahoo.com]

Count me in for two sets as well. 

Ty
Sent from my Verizon Wireless BlackBerry

-----Original Message-----
From: toodamnfunky at comcast.net
Sender: fot-bounces at autox.team.net
Date: Thu, 14 Oct 2010 20:04:37 
To: MadMarx<tr4racing at googlemail.com>
Cc: <fot at autox.team.net>
Subject: Re: [Fot] Brake caliper sealing rings

Count me in for 2 sets 



Jim G. 




----- Original Message ----- 
From: "MadMarx" <tr4racing at googlemail.com> 
To: fot at autox.team.net 
Sent: Thursday, October 14, 2010 1:19:23 PM 
Subject: [Fot] Brake caliper sealing rings 

Hi FOT, 

after I got bothered over years by leaking brake seals I started to develop 
rings out of special DOT 3;4;5.1 resistant rubber with extended heat 
resistance. 

They are made for racing purpose and surprisingly they also do help against 
pad pushback. 
I have run the sealing rings the whole season and had no leaks and hard as a 
rock brake pedal. 
As the dust cover do get toasted during racing I replaced the dust cover by 
a slotted ring to prevent the enter of dirt into the caliper. 

These rings are expensive because of the material they are made from. 

I didn't order a run of rings as I have to take the minimum of 240 from the 
manufacturer to get an acceptable price. 

If there is interest on your side I would like to know. 


Cheers 
Chris 
_______________________________________________ 
fot at autox.team.net 

http://www.fot-racing.com 

Donate: http://www.team.net/donate.html 
Archive: http://www.team.net/archive 
Forums: http://www.team.net/forums 
Unsubscribe: http://autox.team.net/mailman/options/fot/toodamnfunky@comcast.net 
_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: http://autox.team.net/mailman/options/fot/tylerpthompson@yahoo.com