[Fot] Fwd: Tr3 Cylinder pressures

[Bill Babcock]

Oops, didn't notice the 300-3500. Assuming 350 and a 2 liter motor thats 153 horsepower. I'll take it. 

On Nov 2, 2010, at 2:26 PM, Bill Babcock wrote:

> Hmm, that works out to 262 HP for a 2 liter engine at 6000 RPM. Of course I don't know what RPM that BMEP is at. But I'd like to have that motor in Peyote. 
> 
> 
> On Nov 2, 2010, at 10:49 AM, Randall wrote:
> 
>>> For what it's worth, these engines are
>>> nowhere near
>>> theoretical limits so the bmep would likely be 7 to 8.5 bar.
>> 
>> OTOH, the TR2 workshop manual has a curve that shows approx 9.8 bar around
>> peak torque (3000-3500 rpm).
>> 
>> -- Randall 
>> _______________________________________________
>> fot at autox.team.net
>> 
>> http://www.fot-racing.com
>> 
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe: http://autox.team.net/mailman/options/fot/billb@bnj.com