[Fot] TR3/4 filter head relief valve

[Mark Pendergrass]

Copper ' crush ' washers have always worked for me. MPendy
----- Original Message ----- 
From: "Greg & Alison Blake" <ablake2 at austin.rr.com>
To: <fot at autox.team.net>
Sent: Tuesday, May 04, 2010 4:38 PM
Subject: [Fot] TR3/4 filter head relief valve


>I am trying to solve the little seeps I have around the filter head.  Has
> anyone used an o-ring under a washer to seal the pressure relief valve
> adjusting screw lock nut?  I thought I would give this a try but the 
> o-rings
> available at the local autoparts store seems to be too thick and stand 
> proud
> of the chamfer that used to be sealed by a lead wire.
>
>
>
> What have you guys used?
>
>
>
> Thanks,
>
>
>
> Greg
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: http://autox.team.net/mailman/options/fot/mpendy@dishmail.net