[Fot] 7/16 TR4 rear wheel studs

[Joe Curry]

Brad,
If you go metric, it will open a whole wealth of options.  Take an old stud
to your local auto parts store and ask to look in their Dorman's catalog.
You will look for the one that fits the shank and is the length you want.

Joe C.

-----Original Message-----
From: fot-bounces at autox.team.net [mailto:fot-bounces at autox.team.net] On
Behalf Of Brad Kahler
Sent: Monday, May 03, 2010 5:20 AM
To: Friends of Triumph
Subject: [Fot] 7/16 TR4 rear wheel studs

Amici,

I'm looking for some longer rear axle (stock axle & hub) wheel studs
for my TR4.  I would like some that are about 2" long that are 7/16-20
thread that would replace the stock wheel studs without modification.

Any suggestions?

Thanks,

Brad
_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: http://autox.team.net/mailman/options/fot/spitlist@cox.net