[Fot] Started the TR4 today!!!

[Justin Wagner]

I find spraying or squirting a little belt dressing on the belt and 
seeing if that causes the sound to change works well... though the stuff 
does tend to fly off onto the paint, etc. 

--Justin

RACER BUD wrote:

> problem may just be a new tight belt...OLD FASHIONED TEST...start the 
> car...take a hard stick grease...touch it gently to the inside of the 
> belt for about 5 seconds(be careful of course)...see if the sound 
> changes/goes away..
> Racer Bud
> ----- Original Message ----- From: "John Herrera" 
> <jrherrera90 at hotmail.com>
> To: <mike.mehl at yahoo.com>; "Friends of Triumph" <fot at autox.team.net>
> Sent: Sunday, March 21, 2010 1:50 PM
> Subject: Re: [Fot] Started the TR4 today!!!
>
>
>>> pulley. It is not. The water pump is new and I ran it with a drill 
>>> to see
>>
>> if
>>
>>> I could get it to squeak. No luck.
>>
>>
>>
>>
>> Running the water pump with a drill would not put side loads on it like
>> running it with a belt would, and might not cause it to squeak like 
>> it would
>> when run by a belt.
>>
>>
>>
>> John
>>
>> _______________________________________________
>> fot at autox.team.net
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe: 
>> http://autox.team.net/mailman/options/fot/budscars@comcast.net
>
>
> _______________________________________________
> fot at autox.team.net
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: 
> http://autox.team.net/mailman/options/fot/jmwagner@greenheart.com