[Fot] explaination of fittings...

[Irv Korey]

On Thu, Mar 11, 2010 at 1:44 PM, Kas Kastner <kaskas at cox.net> wrote:

> ---- riverside <riverside at southslope.net> wrote:
>
> One note on the stainless braided line.  Check the routing as anything it
> rubs against it will slowly ground away or  through including aluminum
> castings and plastic parts.
>  A bit of shrink tube over the hose at the chaff points fixes it though.
>

If your stainless line is already assembled on the car, and you don't want
to disassemble to install shrink tube, you can make a nice hose cover with
the inner tube from a bicycle tire and some wire wraps.

Irv